assign hostname to loopback ip

networking - What is the difference between “Change hostname via ...
Mar 20, 2015 - What is the difference between “Change hostname via DHCP” versus “Assign Hostname to Loopback IP” in SUSE Linux network configuration ...

Suse Doc: Administration Guide - Configuring a Network Connection ...
To set these options with YaST, proceed as follows: Select a card from the list of detected cards in the Overview tab of the YaST Network Settings module and click Edit. Go to the Hardware tab. Select whether udev should identify the card by its MAC Address or Bus ID.

SUSE Doc: Administration Guide - Configuring a Network Connection ...
To set these options with YaST, proceed as follows: Select a card from the list of detected cards in the Overview tab of the YaST Network Settings dialog and click Edit. Go to the Hardware tab. Select whether udev should identify the card by its MAC Address or Bus ID.

Why not assign the hostname to the loopback address in ... - Server Fault
Jun 10, 2014 - To get the FQDN (through hostname -f ) the system finds the IP from the hostname through /etc/hosts and then returns the first entry in the line.

Hostname and IP address mapping in /etc/hosts - Unix & Linux Stack ...
Jan 14, 2014 - My first question is: Since /etc/hosts is mapping from IP to hostname, ... resolved to 192.168.10.10 instead of loopback IP address 127.0.0.1.

networking - how do I set a hostname in yast? - Unix & Linux Stack ...
Mar 20, 2015 - how do I set the hostname, FQDN, in yast? I ran yast => network ... Change Hostname via DHCP ││ ││[x] Assign Hostname to Loopback IP ...

openSUSE 12.2: Chapter 13. Basic Networking
IPv6 makes it possible to assign several addresses to one network interface at ...... Assign Hostname to Loopback IP associates your hostname with 127.0.0.2 ...

Interface Configuration for IP
Configuring an Ethernet interface is pretty much the same as the loopback ... to guess whether it is a network or a hostname by looking at the host part bits.

Configuring the Loopback Adapter on Microsoft ... - Oracle Distilled
Jul 2, 2010 - You can prevent this issue by configuring the Loopback Adpater on .... is “ping HOSTNAME” to check if the IP address is setup correctly in our ...

Why Ping <hostname> Going for Loopback Ip? - Toolbox for IT Groups
Mar 12, 2012 - Hi all, We are using linux x86-64 server for dev purpose. We are facing problem on configuring /etc/hosts file. now we are not ...

NetworkConfigurationCommandLine/Automatic - Community Help Wiki
Jul 18, 2015 - Setting/changing the hostname; Finding your network interface; Disable ... It will probably include eth0 (hardwired NIC), lo (loopback interface for the ... To configure a dynamic IP address auto eth0 iface eth0 inet dhcp ## Or ...

Network Configuration - Official Ubuntu Documentation
To temporarily configure an IP address, you can use the ifconfig command in ... The loopback interface is identified by the system as lo and has a default IP ... configure your system for name resolution using DNS and static hostname records.

Setting up a TCP/IP network on Linux - Ccm.net
This article describes the implementation of a TCP/IP network for all Linux distributions. ... For most network applications, it is often important to define a hostname. ... Now that the loopback interface is configured, test it using the ping command:

NetIQ Documentation: NetIQ Sentinel Installation and Configuration ...
On the Hostname and Domain Name page, specify the hostname and domain name. Deselect Assign Hostname to Loopback IP. Click Next. Choose one of the ...

Cisco 3900 Series, 2900 Series, and 1900 Series Software ...
Mar 30, 2016 - Default Configuration; Configuring Global Parameters ... 2. hostname name .... The loopback interface acts as a placeholder for the static IP ...

Configure Networking on Ubuntu — SwiftStack Documentation
ip addr. Basic network configuration and hostname on a Ubuntu system are stored ... The loopback network interface auto lo iface lo inet loopback # The primary ...

Linux Basics - Static IP and Network Configuration on Debian Linux ...
This guide explains how to configure static IP address, dns configuration and ... auto lo iface lo inet loopback #My IP description # IPv4 address iface eth0 inet static ... In my case the hostname is server1.example.com to add the hostname use:.

localhost - Wikipedia, the free encyclopedia
In computer networking, localhost is a hostname that means this computer. It is used to access the network services that are running on the host via its loopback network interface. Using the loopback interface bypasses any local network interface hardware. ... On most computer systems, localhost resolves to the IP address 127.0.0.1, ...

How to Get Started Configuring Your Network in Oracle Solaris 11
May 16, 2012 - As the system starts to configure the data links and receives an IP address ... IFNAME CLASS STATE ACTIVE OVER lo0 loopback ok yes --- net0 ip down ... hostname root@solaris:~# svcadm refresh svc:/system/identity:node ...

Chapter 5: Configuring TCP/IP Networking - O'Reilly Media
However, as the local hostname is frequently used to look up the host's IP address, ..... Configuring an Ethernet interface is pretty much the same as the loopback ...

Setting hostname properly in Fedora and Red Hat - Lukáš Zapletal
Dec 7, 2011 - Setting up a hostname is not a hard task, in Fedora and Red Hat it's a ... This is totally different scenario - server with static IP address must ... In this case, only in this case, I would recommend adding loop back hostname entry:

Red Hat Linux 7 Unleashed | Configuring the Network | InformIT
This section will walk you through changing and setting hostnames, IP ... /etc/sysconfig/network; /etc/HOSTNAME; /etc/hosts; /etc/services; /etc/host.conf ..... interface status, such as whether it is up or down and whether it's a loopback interface.

How to Set a Static IP on a Linux Machine | IT Support Blog - CNS Sites
Jul 20, 2015 - How to add a static IP Address to a Linux computer. 1) Setting your system's hostname. You should first set your system's hostname to the Fully ...

Network Configuration - Webmin Documentation
May 17, 2015 - This page explains how to set your systems IP address, hostname, DNS servers ... All loopback, Ethernet and PPP interfaces will be shown, although not all will ... To assign a different address, enter it into the IP Address field.

Network configuration - ArchWiki
4 days ago - 2.1 Local network hostname resolution ... 5 Configure the IP address .... mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd ...

Bug #234543 “/etc/hosts: hostname alias of loopback” : Bugs : netcfg ...
May 24, 2008 - But this is not your ip adress in your local network! ... It is highly unusual to use the hostname for a loopback address. ... and self-firewalled, I move them to the public net and hand assign them an IP in /etc/network/interfaces.

How to Change HostName and IP-Address in CentOS / RedHat Linux
Oct 14, 2013 - To change the ip-address along with the hostname, follow the steps ... down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] ...

Beware I/O Analyser on DHCP Subnets in a Windo... | VMware Communities
Aug 22, 2014 - I/O analyser is built on SUSE linux with an internal hostname of ... and selecting "Assign Hostname to Loopback IP" in "Network Devices" ...

Setting System Hostname - Alpine Linux
Jan 20, 2014 - 1 Setting System Hostname; 2 Configuring DNS; 3 Enabling IPv6 (Optional) ... 4.1 Loopback Configuration (Required); 4.2 Wireless Configuration; 4.3 ... For a static IP configuration, it's common to also add the machine's ...

Network Management - Check Point
Note - When you add, delete or make changes to interface IP addresses, it is possible ..... You can define a virtual loopback interface by assigning an IPv4 or IPv6 address to the lo (local) interface. ..... Configuring Host Name - CLI (hostname) ...

21.6. Configuring a Network Connection Manually
To assign a certain network configuration to any card of a certain type (of which .... for networks connected to the local host such as loopback, Ethernet, ISDN, PPP, ... of the IP address, the fully qualified hostname, and the hostname into the file.

Chapter 6 Configuring IP - HP
Loopback interfaces. Each IP address on a routing switch must be in a different sub-net. You can have only one interface that is in a given sub-net. For example ...

Network Settings | Elasticsearch Reference [2.4] | Elastic
The node will bind to this hostname or IP address and publish (advertise) this host to ... Any loopback addresses on the system, for example 127.0.0.1 . ... The network.host setting explained in Commonly used network settings is a shortcut ...

The Virtualization Cookbook for IBM z Systems Volume 3: SUSE Linux ...
Configuring the host and domain names To configure the host and domain, ... Assign Hostname to Loopback IP • Modify DNS Configuration Custom Policy Rule ...

RHEL7: Configure IPv4 addresses and perform basic IPv4 ... - CertDepot
Jun 7, 2016 - ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state .... To permanently assign the rhel7 hostname to the server, type:

AS/400 TCP/IP Configuration - Easy400
Jump to Configuring TCP/IP - Work with TCP/IP remote system information. 10. Work with ... To assign an IP address to the AS/400, select 1: ...

Basic Settings on a Router (1.1.3) > Cisco Networking Academy's ...
Mar 20, 2014 - When initially configuring a Cisco switch or router, the following steps should be ... End with CNTL/Z. Router(config)# hostname R1 R1(config)# .... R1# configure terminal R1(config)# interface loopback 0 R1(config-if)# ip ...

Cumulus Linux vs Cisco NX-OS: Initial Configuration – Cumulus ...
Jul 22, 2016 - switch# configure terminal switch(config)# hostname Switch1 ... Add IP address to loopback lo interface (Loopback is created by default)

Configuring a Loopback Interface - Technical Documentation ...
Configuring the Hostname. Understanding Hostnames .... To configure a loopback interface: Using the host IP address, assign it to the loopback interface.

OpenBSD FAQ: Networking
ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200 ... Interfaces are configured at boot time using /etc/hostname.if files, where if is .... OpenBSD has a simple mechanism for setting up IP aliases on an interface. To do ...

Lab 2.3.2 Configuring OSPF with Loopback Addresses - Chabot College
Configure routers with a Class C IP addressing scheme. ... On the routers, enter the global configuration mode and configure the hostname as shown in the chart ...

How to get multiple IIS web sites working on your development
Oct 26, 2011 - The structure is basically hostname.domainname, so in the case of ... Host names are resolved to ip addresses by DNS (Domain Name Servers), ... is that it is a special ip address on every machine known as the loopback address. ... the same ip address, IIS has a way to assign a host name to a web site.

12.3.3. Configuring the OpenStack Networking Service
Configuring the OpenStack Networking Service ... add an entry to the /etc/hosts file mapping the hostname of the system to the loopback IP address ( 127.0.0.1 ).

Network configuration - Docker
How can Docker supply each container with a hostname and DNS configuration ... Because Docker may assign a different IP address to the linked containers on ..... In fact, the lo loopback interface available on every Linux machine (and inside ...

Bootstrapping Process for Netmail Secure - Netmail Deployment ...
Apr 11, 2016 - The domain name is also used in DNS for appending a search suffix. Uncheck Assign Hostname to Loopback IP and Change Hostname via ...

What is the difference between "Change hostname via DHCP" versus ...
Assign Hostname to Loopback IP associates your hostname with 127.0.0.2 (loopback) IP address in /etc/hosts . This is an useful option if you want to have the ...

ORACLE-BASE - Linux Network Configuration
... networking configuration, including the hostname and gateway settings. ... The following example is for a static IP address. ... The "/etc/resolv.conf" file is used to configure the location of the DNS servers to be used for name resolution. ... lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 ...

An introduction to Debian networking setup - Debian Administration
Sep 25, 2005 - Setting up your hostname upon a Debian installation is very ... You can add hostname and IP addresses to the file /etc/hosts for static lokups. ... The loopback network interface auto lo iface lo inet loopback # The primary ...

How to configure an IP address in Solaris 11 - The Geek Diary
/etc/hostname.ip*.tun* /etc/nodename /etc/nsswitch.conf ... ipadm show-if IFNAME CLASS STATE ACTIVE OVER lo0 loopback ok yes --- net0 ip down no ---.

openSUSE 11.3 installation - STDI Consulting
Nov 6, 2010 - First screen is Hostname and Domain Name: Enter the firewalls Hostname and ... via DHCP and leave the Assign Hostname to Loopback IP.

4.10.2 Setting the hostname
Setting the system's hostname is a simple matter of using the hostname command. ... the hostname must appear in the file /etc/hosts, which assigns an IP address to ... This assigns your hostname, floof.org, to the loopback address 127.0.0.1 ...

SecureCRT - Assigning Local IP Addresses - VanDyke Software
Setting Up Remote Server Connections Using Local IP Addresses ... You may also hear it called the "loopback address". ... set up the correct local IP addresses, you can use a Windows HOSTS file to associate a hostname with any IP address.

networking - How to set static IP address? - Ask Ubuntu
Aug 28, 2013 - Is there a way to make the guest Ubuntu ip address to be static? ... With you answer I managed to configure my Ubuntu and Fedora in a seconds. ... The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface ... x.x), edit /etc/hosts and /etc/hostname to match.

Quick HOWTO : Ch03 : Linux Networking - Linux Home Networking
Sep 9, 2013 - You need to know all the steps needed to configure IP addresses on a ...... the loopback interface and also the server's own hostname, and use ...

hadoop - How to configure Ambari server and HDP applications using ...
May 9, 2016 - Having these as separate lines seems to be the problem. 127.0.0.1 localhost ... How to configure Ambari server and HDP applications using hostname with loopback IP address?

Ubuntu Server Networking configuration
Apr 18, 2014 - iface lo inet loopback ... Configuring Static IP address for your network card ... Setting up your hostname upon a ubuntu installation is very ...

Firefox + openSUSE - Reddit
A few questions: - Did the "Assign Hostname to Loopback IP" help? - can "other distros" out of the box resolve your hostname to an IP? I blame Firefox to do a ...

Raspberry Pi • View topic - /etc/network/interfaces changed,weird ...
It seems to work, but hostname -I says I have two IPs. ... Normally, you will have at least two IP addresses: 1) your loop back address, and 2) your network address. .... OK so from now on the proper way to configure my eth0 is.

Configuring TCP/IP on IBM i
Aug 8, 2016 - On a Control Language (CL) command line, enter the Configure TCP/IP (CFGTCP) command. Verify that your TCP/IP address and LOOPBACK ...

IP Address Configuration in Kali Linux | Solutions@Experts.com
Jul 20, 2014 - How to change hostname and how to add route in Kali Linux ... Below parameter require for loopback address, it's default (127.0.0.1). ... Create a virtual interface and assign an IP address within the network or other network.

How to Setup Network Interface on Ubuntu, Debian & LinuxMint ...
Oct 20, 2015 - Now edit /etc/hosts and bind new hostname with local ip address. ... Now edit your network interface configuration file /etc/network/interfaces and configure it. ... auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto ...

What is a localhost? - WhatIsMyIPAddress.com
A localhost is, put plainly, the standard hostname given to the address assigned to the loopback network interface. Translated into an IP address, a localhost is ...

Assigning a loopback interface to a VRF - Brocade
device(config-lbif-1)# vrf forwarding customer-1; Assign an IPv4 address and mask to the loopback interface. device(config-lbif-1)# ip address 10.0.0.1/24.

openSUSE 12.3: Chapitre 13. Basic Networking - Guillaume GARDET
Networks combined by TCP/IP, comprising a worldwide network, are also ...... Assign Hostname to Loopback IP associates your hostname with 127.0.0.2 ...

How to configure DHCP client to request hostname (e.g., with DNS ...
How to configure DHCP client to request hostname (e.g., with DNS)? ... lo iface lo inet loopback auto eth0 iface eth0 inet dhcp hostname myhostname ... but the host could not be pinged by its hostname (pinging by ip worked).

Why not assign the hostname to the loopback address in /etc/hosts ...
So I understand that the hostname should (at least in Debian systems) be set in /etc/hostname . To get the FQDN (through hostname -f ) the system finds the IP ...

eLog V200R003C10 HA System (Veritas) Installation Guide (SUSE ...
Dec 29, 2015 - 6.1.1 Setting an IP Address for the Management Port (iMana) ..... Deselect Change Hostname via DHCP and Assign Hostname to Loopback IP.

How to change local hostname name on GNU / Linux - Walking in ...
Oct 17, 2011 - Therefore one of the first things I do while configuring a new server is to ... On the second line which assigns the hostname for the loopback IP ...

Chapter 5. Network setup - Debian
The hostname resolution via deprecated NETBios over TCP/IP used by the older Windows ... They allow us to configure network independent of the legacy ifupdown package. ... auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp.

Debian Linux Network Setup Wireless Setup - DebianHelp.co.uk
Basics Of IP Networking; Setting up Hostname; Setting up DNS; Setting up IP ... Loopback: lo; Ethernet: eth0 , eth1; Wi-Fi: wlan0 , wlan1 , wifi0 ,; Token Ring: tr0 , ...

OBIEE / FMW and networking on DHCP hosts
Aug 6, 2012 - Ideally it should be using the hostname (and thus the loopback IP). ... each time the IP changes, or at least restart the OBIEE stack; Assign a ...

Cumulus Linux Basic Setup - Manual | www.arpaware.com
Jan 12, 2016 - In this post we will go over the basic setting of cumulus Linux on a brand ... plane network (the main table) must bind to the loopback IP address. ... We need to edit /etc/hostname and /etc/hosts files with the desired hostname.

Solaris network configuration - Softpanorama
Feb 19, 2014 - When adding a network interface to a system, you must configure ... An IP address is for each interface is stored in the hostname file, located in the .... The /etc/inet/hosts file contains at least the loopback and host information.

How to Change Your Raspberry Pi (or Other Linux Device's) Hostname
Jul 9, 2013 - The default hostname for the Raspberry Pi is, creatively enough, ... Today we're going to fix that by assigning unique names to each Pi unit ...

Configuring the Interface (TCP/IP Network Administration, 3rd Edition)
The name of the network interface that you want to configure for TCP/IP. ... Your system must be able to find the hostname in /etc/hosts because ifconfig usually .... It is the same loopback device discussed in Chapter 5, "Basic Configuration ...

[RESOLVED] Static IP address - CentOS
Sep 12, 2012 - i can set static ip without LAN interface eth0, eth1 etc. ... HOSTNAME=localhost.localdomain ... Loopback is 127.0.0.1 but i need to keep my 3 machines in the LAN without eth0, eth1 etc ... You would configure the dnsmasq run by the libvirtd to offer the pre-determined IP's to the guests (and for the host).

Configuring access to a server behind the SonicWALL from the LAN ...
Jan 4, 2011 - Configuring access to a server behind the SonicWALL from the LAN / DMZ using Public IP addresses (Loop-back NAT policies). ... Let's say you have a Web site for your customers, and its hostname is <www.domain.com>.

BIND for the Small LAN - madboa.com
The easiest project is setting up BIND to do nothing but cache DNS information locally. ... a definition of localhost, and a definition of the loopback address, 127.0.0.1. .... The last config file tells named that the hostname associated with the IP ...

Linux Network Configuration - YoLinux.com
Assigning an IP address; # Network IP Aliasing; # Change Host Name .... auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet ... NETWORKING=yes HOSTNAME=my-hostname - Hostname is defined here and ...

how to setup static ip address Ubuntu 12.04 - YouTube
in the video , i am going to show you how to set up static ip address on ... lo inet loopback so what should i do ...

How to Configure a Cisco Console Router - Pluralsight
This article takes a look at the common steps that are followed in setting up a console server, ... Console(config)#ip host hostname port-number ip-address ... It is because of this that loopback IP addresses are typically configured on console ...

Loopback Adapter Configuration - ClearPeaks Blog ClearPeaks Blog
Jan 10, 2011 - To properly configure the loopback adapter you need to go through the following steps: ... Image 8: Loopback adapter Connection IP address configuration ... adapter works properly the outcome of running nslookup hostname ...

Make dhcp assign same IP and hostname for different interfaces at ...
Make dhcp assign same IP and hostname for different interfaces at one machine. ... “Change hostname via DHCP” versus “Assign Hostname to Loopback IP” in ...

Chapter 2. interface configuration - linux-training.be
fixed ip. The screenshot below shows /etc/network/interfaces configured with a fixed ip ... root@debian7~# cat /etc/network/interfaces auto lo iface lo inet loopback auto ..... Ubuntu/Debian uses the /etc/hostname file to configure the hostname.

Configuring The OSPF Router-ID | Free CCNA Workbook
Learn how to configure an Open Shortest Path First Router-ID on a Cisco router ... logical interface (loopback interface) or the highest IP address of an active interface. ... enable configure terminal ! hostname R1 no ip domain-lookup ! interface ...

Configuring a static IP address/mask and default gateway
Step 1 - Configure IP Address, Mask and Gateway ... NETWORKING=yes HOSTNAME=frida.localdomain GATEWAY=172.30.10.1 [root@frida root]# ... Shutting down interface eth0: [ OK ] Shutting down loopback interface: [ OK ] Setting network ...

Automatically Configure Hostname for New EC2 Instances
Sep 15, 2010 - ... the default hostname to something more meaningful than "ip-10-205-14-33" for instance. ... Setting the desired hostname and fqdn for the instance can be critical if ... ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ...

[Help] radtest mschap problem - FreeRADIUS
Apr 26, 2013 - host name is radius ip 10.58.5.58 Full Domain host name: ... via DHCPNo interface with dhcp ││ ││[ ] Assign Hostname to Loopback IP ...

Configure Static IP Address on Linux VM in VMware Player ...
Mar 12, 2013 - By default, VMware Player uses DHCP to dynamically assign IP address ... The loopback network interface auto lo iface lo inet loopback # The primary ... HOSTNAME=web.example.com GATEWAY=192.168.1.1 # Restart ...

7.2. General Network Configuration - Linux From Scratch!
Udev may assign network card interface names based on system physical ... The command below creates a basic configuration file for a Static IP setup ... During the boot process, the file /etc/hostname is used for establishing the ... The ::1 entry is the IPv6 counterpart of 127.0.0.1 and represents the IPv6 loopback interface.

Chapter 6. Network Interfaces - Fedora Documentation
Understanding the role these files play in setting up the network stack can be ... the IP address of the loopback device ( 127.0.0.1 ) as localhost.localdomain .

DNS and DHCP configuration [OpenWrt Wiki]
6 days ago - Assigning DHCP pool to a subnet in a large network .... Note that dnsmasq listens on loopback by default. ..... you can use just one MAC address) and assign the IP address 192.168.1.230 and the hostname example-host to it.

[ubuntu] /etc/hosts and /etc/hostname - Ubuntu Forums
I got out of the post on setting up the ldap server that, if I understand him should be ... /etc/hostname This file should only contain the hostname and not the ... The mapping of IP addresses to hostnames (not FQDN) in the beginning. ... for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ...

when default route is added it can be - AIX for System Administrators
host <hostname> searches through the /etc/hosts file, and display the ip .... ifconfig en0 shows attributes of a specific interface (lo0:loopback, en0:ethernet...) ... ifconfig en1 50.20.100.47 netmask 255.255.255.192 configure ip (or ifconfig en0 ...

OS/2 Technical Support - TCP/IP Networking
Your network adapter should have the "IBM TCP/IP" protocol attached to it. ... Highlight "loopback interface" and check "Enable interface", "Manually, using:", 127.0.0.1. ... Fill in "This machine's hostname" and "Local domain name". Also ... them by assigning you different DNS IP addresses depending where you are located.

salt.states.network - SaltStack
system: network.system: - enabled: True - hostname: server1.example.com .... enabled: Designates the state of this interface. kwargs: The IP parameters for this ...

Ubuntu Networking Configuration Using Command Line | Ubuntu Geek
Feb 5, 2007 - Configuring Static IP address for your network card. If you want to ... Setting up your hostname upon a ubuntu installation is very straightforward. .... For some reason my network was configured to the loopback device. My ssh ...

Installation and How-To Guide - SAP NW CE 7.3...Trial Version
Jul 30, 2012 - CONFIGURE THE VMWARE VIRTUAL MACHINE BEFORE FIRST START . .... Hostname via DCHP and Assign hostname to Loopback IP ...

WordPress › Support » Why does my website return a private address?
The internal ip address will work fine for access within the LAN, but will ... to me to configure the outside address on a local machine since the firewall is doing the translations. ... If the firewall blocks loopback connections, trying to access the external ... And you need to or you will get a mix of hostname/IP URLs on your site.

How to Configure Multicast - XAP 9.1 Documentation - GigaSpaces ...
Mar 3, 2013 - The word "multicast" is typically used to refer to IP Multicast, the ... /etc/hosts file does not include the IP address associated with the server's hostname. ... lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 ...